Please see the documentation for the MP-114 for instructions on updating the
gateway.
Configuring the Mediation Server ??? Chapter 6 193
Now that you have verifi ed that you have the correct version, it??™s time to confi gure the
MP-114 to support your environment. If you had to update your gateway and reset the box,
you??™ll need to get back into the gateway as Admin.
We??™ll start by defi ning the endpoints:
1. Click Protocol Management and then Endpoint Phone Numbers on the
toolbar.
2. Confi gure endpoints 1 and 2 with phone numbers to ring the handset that is
plugged into FXO ports 1 and 2. In Figure 6.17, we are using 3365551201 and
3365551202.
Figure 6.17 Endpoint Phone Number Table
3. Once you have the endpoints confi gured, click Submit.
Now let??™s confi gure the routing tables:
1. Click Routing Tables on the toolbar then click Tel to IP Routing.
2. Confi gure the routing tables to match your environment. In our example, we
want to route calls for +13365551201 and +13365551202 to the MP-114 gateway
address of 10.1.10.10. So, we will route calls for +133655512 to the OCS Mediation
Server gateway address of 10.1.10.25, and we will route all other calls to the MP-114
address of 10.1.10.10. Also, make sure you have the Route calls after Manipulation
set in the Tel to IP Routing mode. See Figure 6.18 for an example of the
confi guration.
194 Chapter 6 ??? Confi guring the Mediation Server
3. Click Submit.
Now we??™ll confi gure the manipulation tables:
1.
Pages:
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239