Some PBX companies are building SIP functionality into their products. For instance,
Cisco has built SIP functionality into its Call Manager product, as has Nortel with various
models of its Communication Server line of products. It is important to remember that although
the PBX you are using may support SIP natively, you must check the Microsoft Web site for
a list of approved hardware if you expect to receive support from Microsoft should you have
issues. You can check out the vendor list for Microsoft Unifi ed Communications at www.
microsoft.com/presspass/presskits/uc/partners.mspx#EOH to see what is available from
different vendors.
Now let??™s confi gure the gateway. On a computer with access to the network where you
have your gateway connected, follow these steps:
1. Click Start | All Programs | Internet Explorer.
2. Type http://10.1.10.10 in the Internet Explorer Address fi eld and click
Enter.
3. In the Login text box, type Admin for the username and password. Both are
case-sensitive, so make sure the A is uppercase.
4. You should now see the AudioCodes Channel Status page. Click on Status
and Diagnostic on the left-hand side and then click on Device Information.
This will display general information about the AudioCodes MP-114. You want
to verify that you have a version of code that will support OCS. As of this writing,
version ID 5.00A.033.001 was the minimum. If you don??™t have the correct
version, you will need to download the correct version and update the gateway.
Pages:
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238