The dexterity with which this is done makes
the operation appear extremely simple, but any but a skilled and
experienced operative would almost surely cut through the skin. The
most delicate part of the glovemaker's art, in which exact judgment is
required, comes in preparing the "tranks" or slips, from which the
separate gloves are cut. The trank must be so cut as to have just
enough leather to make a glove of a certain size and number. The
operation would be easy enough if the material were hard and stiff,
and if the elasticity were uniform, but this is rarely the case.
To accomplish this operation the trank must be firmly stretched in one
direction, and while so stretched a "redell" stamps the proper
dimensions in the other direction, to which the leather is trimmed.
Upon the nicety with which this operation is performed depends the
question of whether the finished glove will stretch evenly or too much
or too little in one direction or the other. After this the trank or
outline of the glove must be cut out. In olden times of glove
manufacture an outline was traced upon the leather and the pattern was
cut with shears. Modern invention has produced dies and presses which
are universally used.
Pages:
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113